Garage Door Sensors Not Working? Fixing Tips
Are your garage door sensors not lighting up properly? When garage door sensors malfunction, this is frequently caused by a few basic problems. Whether the issue is misalignment, blockages, or electrical issues, knowing these common issues will help you locate the source of the issue quickly.
In this post, we’ll walk you through the necessary troubleshooting procedures to get your sensors back in working order. We'll go over how garage door sensors work and discuss fixing garage door sensors so you can get your garage door operating smoothly again. Read on for a thorough analysis of every issue and expert repair guidance.
Do not hesitate to contact Up & Down Garage Doors for dependable and effective repair services. Our garage door company excels in all ranges of professional solutions and is always here at your disposal.
Common Sensor Issues
Troubleshooting Main Problems
- Check sensor alignment first: Sensor problems are often caused by misalignment. Start by looking at the sensors on either side of the door. Make sure they’re facing each other straight. If needed, realign the sensors.
- Check for obstructions: Remove anything that could block the infrared beam from the sensor. Look at the sensor lenses for any debris like spider webs or dirt. Gently wipe the lenses with a soft cloth to clear any accumulation. If you are not sure about how to clean the garage door sensors, call UAD now.
- Check wiring connections: Make sure the sensor’s wiring is good. Check for any disconnected, frayed, or loose wires. If you find any issues, call a technician for proper repair.
- Check the power supply: Make sure the sensors are powered. Check the garage door opener’s connections and power supply. A faulty transformer or tripped circuit breaker could be the reason for the lack of power supplied. If needed, replace the transformer or reset the breaker.